How to Choose the Right Roofing Material


Metal roofing normally appears in several materials such as copper, steel and aluminum. It also can be in a shape of sheeting and tiles. They are long-lasting, non-combustible and they are also good at shedding snow and ice. The majority of metal roofing materials are created from recycled material and they can be recycled again. Metal roofing has great energy efficient qualities. On the other hand, aesthetically they don’t look very nice. Especially metal sheeting. Most of us know that metal can contract a corrosion so it needs a good corrosion protection. We advise you to avoid installing steel roof because of its characteristics if you live near a coast since steel is very prone to corrosion. You will additionally require much bigger gutters to take care of the runoff due to the fact that the metal roofs spill water at a quicker rate than textured roofing materials.

Asphalt shingles

Known as composition shingles, asphalt shingles are one of the most common materials when it comes to roofing. They are usually economically priced even though some of the ” top of the line” asphalt shingles can rival the cost of some more expensive roof materials and roof types. Premium asphalt shingles have a longer warranty than some basic shingles and some states offer asphalt shingles recycling programs.

Wood shingles

Wood shingles are a popular choice when it comes down to roofing options. They are visually very attractive roofing material. Because of their nice visual texture, people often use them on a steeper roof slope where roof is more visible. Because wood shingles are made from sustainable material and they are recyclable, it is also a greener choice. They’re usually made from redwood, pine, cypress, and western red cedar. Because of their aesthetics, people prefer them over other standard roofing choices. Wood shingles are not as dark as asphalt shingles. Installing wood shingles is difficult, it is advisable to have them installed by professionals with experience. Another thing, they are not fireproof, if you reside in areas where seasonal wildfire is a thing, it is not suggested to install wood shingles on your home. Nonetheless, wood roofs might be fire retardant, but that doesn’t make them fireproof. They also succumb to rot and decay over time so it is important to keep them free and clean of debris. Regular inspection and maintenance are also required.

Concrete/Clay tiles

Clay and concrete are heavy materials and that means that your support beams and roof structure needs to be designed to carry the weight of concrete or clay roof. Tiles are also extremely fireproof; they offer a wide range of architectural styles and they also can mimic other roofing materials like wood or slate. Like with wood shingles, they also require installation by experienced professionals.

Composite roofing

Composite roofing can be found in several types of materials like rubber, plastic combinations of both or fiber cement. Composite roofing copies other types of roofing styles like tile or slate. It offers a lower expense opposed to more costly roofing styles like slate and more affordable servicing. It is lighter than conventional slate, or concrete roofing material and it can be installed over standard roof structure. Also, it can be very long-lasting. Nevertheless, it is fairly new on the market so its long-term sturdiness and functionality are not fully known.

Slate roof

Slate roofing belongs to the most durable and long-lasting materials on the market. It is made out of a genuine stone and it can look gorgeous. Like with clay and concrete tiles, slate roof is heavy, and your roof structure needs to be engineered to support its weight. Because of its beauty and durability, slate is one of the most pricey selections you can make. It is long-lasting, fireproof, visually appealing and can be reused. It also calls for competent professionals roofing company for installation and is among the most costly roof types available

Asphalt Roads protection material

Road Coating Asphalt Maintenance rejuvenator TL-2000

It is known to everyone that development of motor road network in any country reflects the potential of the country’s general economic development.
In 20th century, roads came to our homes, and at the present, every second person of us spends a half of his or her working time as a driver or passenger.
The roads we take are those enabling us to reach the necessary place fast and without time-consuming traffic jams and crashes, and in many cases this depends on the quality of road pavement.

Asphalt concrete shows considerable strength, impermeability and resistance to water, and the ability of elastic and plastic deformation. It provides smoothness and elasticity of road pavement, comparatively noiseless traffic, and good road grip of wheel tires.
Unfortunately, The asphalt concrete, which is one of the greatest inventions of mankind unrivalled to the present time, loses all these positive properties in 2 to 5 years after the road is built.

Since the advent of asphalt concrete, best inventors in the field of road building have been trying to prolong the asphalt concrete service life by using various traditional methods such as strengthening the material with various polymers , road pavements impregnation with various oils, road pavement reinforcement with fabric, etc.

All the above methods result in sharp increase in the road pavement cost, and what is even more important, deteriorate the road pavement properties such as road grip of wheel tires and so on.
The search of conventional solution aimed at strengthening the asphalt concrete mixtures and improvement of repair methods is being conducted day and night by leading road-building specialists of the world. However, radical solutions of this problem require another approach and another conception.

The use of material TL is exactly such a solution. The new approach is based on the simplest intention to seal off the road from the action if factors causing damage to its pavement. This solution is a breakthrough in road building and maintenance, and material TL has corroborated its serviceability on the roads of Europe, America, Africa and Asia. The material is unique in its simple production and easy application.

TL-2000 is a black liquid single component micro-bitumen polymer composition asphalt rejuvenator to be applied to the surface of asphalt concrete road in a thin layer by pouring or spraying and subsequent spreading. A thin-film coating is thus created. The hardening time is 40 to 60 minutes (depending on the ambient temperature), i.e., in 40 to 60 minutes the road may be opened for traffic.
The method being proposed is compared with the existing ones in the table below []

TL consumption is 0.7 to 1.5kg/m^2 depending on the road pavement condition. Adhesion of the material to the road surface primarily occurs through chemical combination with the bitumen component.

The active gaseous component of TL penetrates into bulk of asphalt concrete to a depth of 4 cm and chemically combines with the bitumen forming a copolymer bitumen composition having the necessary plastic and elastic properties.

Except for rejuvenation, TL performs the following main functions. After its application to the road surface, and complete hardening (complete polymerization), we obtain a thin membrane coating preventing penetration of water and gases including ozone into the road pavement and protect the road from ultraviolet and infrared solar radiation and various chemicals.

TL-2000 does not contain solvents and does not cause any damage to the road.
The material allows an increase in the road grip of a rubber tire by about 20 to 30% and thereby considerably shortens the braking distance and improves the traffic safety.
It is possible to produce and apply coloured modifications of TL. for instance, the road section with especially dangerous traffic conditions can be made red with an increased coefficient of friction, a parking place and be made green, etc.

TL-2000 can be used not for road coating or asphalt maintenance only. The available modifications of TL allow other applications as well. For instance, the TL-S modification shows properties of rubber in addition to the above-described properties.
The material is easily and quickly applied to underground concrete surfaces by using an air compressor or with a hand brush, ensuring perfect damp sealing.
The coating does not pass water at a pressure of up to 6atm. the work is done without material heating.

All modifications based on material TL are liquid single-component compositions hardening in contact with air.
They will not freeze at temperatures of about -30C .

In sealed barrels or other containers, the material can be stored even in the open air during up to 2 years.
Thus, a highly effective new material is now available . Its main features are as follows:

1. Application of the material to asphalt concrete pavements of motor roads, airfields, storehouses floors, etc. ensures a considerable increase in service life of the pavement and imparts them impermeably and resistance to water, acids, alkalis, oils, gasoline and salt solutions.

2. It is possible to obtain colours asphalt concrete surfaces.

3. It is possible to utilize ash and various other pulverous materials.

4. Application is easy, quick, cheap and convenient.

5. All the materials used for equipment cleaning (kerosene, diesel fuel, etc.) as well as the equipment itself are not expensive or difficult to obtain.

6. Application does not require special facilities. If the volume of work is rather small, brushes or rubber spreaders can be used.

How to Maintain Stamped Concrete Structures

It is quite easy to maintain the stamped concrete structures in your home. In fact, there are numerous methods that you can apply easily and conveniently. It is highly recommended that the surface is sealed with specifically designed sealers that are water and heat resistant as well as durable. These protective materials also allow for the easier and quicker cleaning and maintenance of this type of concrete. The different sealers have different composition. Usually sealers are made primarily from solid materials and they are solvent based. They protect the covered surface from the growth of any sort of fungi and are also highly dirt and dust resistant. If you still find it difficult to maintain this kind of concrete surfaces, there are some other efficient cleaning methods that are quite helpful as well.

Most of the damage done to concrete occurs during the seasons with regular rain falls because they bring a lot of dust and dirt that falls on the outdoor surfaces. If the sealer you have used is efficient, no damage should be incurred and the surface should remain relatively clean. If blotches are visible on concrete after rain, this it is a good sign of the performance of sealer. These blotches can easily be removed by cleaning the surface with water and drying it afterward with a cloth or blower. It is effortless and not time consuming. And voila, all patches are gone! It is important for the water to be adequately removed from the sealed concrete in order not to create blotches. A fine solution is to grow plants around the concrete floors because they will be continuously absorbing the water near and on them. Similarly, many people use mats made of rubber. Keep in mind that rubber is easily absorbed by the sealer of the stamped concrete, which leaves the surface covered with unwanted patches.

Make sure that this type of concrete is resealed after a certain period of time. The sealer will slowly wear out and lose its insulation qualities, despite the adequate and regular maintenance. The best option is to reseal the concrete structures every four to six months. This will effectively keep the floor protected from the dust and dirt and you will not have to deal with any unpleasant patches any more. The resealing cycle depends on many factors. The insulating material is actually affected by the sunlight, rain and the weight of the objects placed on the concrete structure. So, you have to calculate on your won after how many months you will need to reseal it. The greater the exposure to rain, water and dust, the sooner the stamped concrete requires resealing.

If you do not pay special attention to the resealing process, then it will start losing its functional qualities. Its color will look faded. However, if you reseal the concrete even after it has lost its initial color, you will have a brilliant concrete floor again. If by accident something is spilled on your concrete floor then do not worry at all. All you have to do is to wash it with some dish-washing detergent and then let it dry for some time. You will see that concrete floor can be very easily maintained. Thus, do not hesitate to keep it looking brighter and shiner.

Advantages of a Water Based Concrete Sealer

Concrete sealer is a protective material added to concrete to protect it from external influences such as chemicals, permeation of water, gas and UV light. Concrete is a porous material and can pass water. A concrete coating can be used to close the pores evident in concrete. Coatings are divided into two categories namely water and solvent based. Concrete coatings are generally made of chemicals such as: Acrylic, Epoxy, silanes, siliconates and siloxanes. In protecting concrete surface it will form a protective film layer on the surface of the concrete. The coating from Silanes, siliconates and siloxanes is a type of reactive coating material. These substances are widely used as a coating form of penetration.

A water base concrete sealer is suitable for indoor purposes. These concrete coatings have a number of advantages compared to solvent based concrete coatings, such as not to cause pollution and odour, so it is environmentally friendly. The substances used are usually are acrylic, epoxy or urethane or a combination of both. Acrylic is used in water based concrete coatings materials, making it the most economical and easiest to use. While epoxy is also widely used to protect concrete, it does cost a bit more but the quality is superior and durable. Protective concrete made of water base acrylic is more widely used in housing because they are cheaper and convenient to use. In addition, this material is also used to beautify a concrete surface though sometimes necessary to add anti slip. The use of epoxy coatings is widely used for restaurant floors, factory and garage floors.

A concrete sealer protects by forming a film layer on the surface of the concrete. This coating will avoid problems caused external influences such as friction, chemical spills, and reflect UV light. In addition it can also improve the appearance of concrete and make the surface easier to maintain. It also will protect your concrete from the danger of carbonation, corrosion and other chemical effects. If you want to replace this coating is also more easily stripped. It will not take your time and energy.

Using water based concrete coatings can also prevent your concrete from damage. This will make the concrete more durable. Cracked concrete will be easily infiltrated by damaging chemicals such as gas and liquid chemicals. Foreign particles can cause carbonation and corrosion. Small plants such as moss and fungus will be difficult to grow on the surface of the concrete lining.

Concrete coatings are used on almost every aspect of a home, starting from the floor, basement, roof and kitchen. These coatings in addition to functioning as protection also have a decorative function to enhance the appearance of your room. A concrete sealer is also needed in the kitchen of your home because in this place there are various chemicals that can damage your surface. Oils spills and other liquids are chemicals that can cause stains. By coating your concrete with water based coatings, the risk of damage is reduced. Your kitchen will appreciate it as suddenly it becomes easier to clean.