Advantages of a Water Based Concrete Sealer

Concrete sealer is a protective material added to concrete to protect it from external influences such as chemicals, permeation of water, gas and UV light. Concrete is a porous material and can pass water. A concrete coating can be used to close the pores evident in concrete. Coatings are divided into two categories namely water and solvent based. Concrete coatings are generally made of chemicals such as: Acrylic, Epoxy, silanes, siliconates and siloxanes. In protecting concrete surface it will form a protective film layer on the surface of the concrete. The coating from Silanes, siliconates and siloxanes is a type of reactive coating material. These substances are widely used as a coating form of penetration.

A water base concrete sealer is suitable for indoor purposes. These concrete coatings have a number of advantages compared to solvent based concrete coatings, such as not to cause pollution and odour, so it is environmentally friendly. The substances used are usually are acrylic, epoxy or urethane or a combination of both. Acrylic is used in water based concrete coatings materials, making it the most economical and easiest to use. While epoxy is also widely used to protect concrete, it does cost a bit more but the quality is superior and durable. Protective concrete made of water base acrylic is more widely used in housing because they are cheaper and convenient to use. In addition, this material is also used to beautify a concrete surface though sometimes necessary to add anti slip. The use of epoxy coatings is widely used for restaurant floors, factory and garage floors.

A concrete sealer protects by forming a film layer on the surface of the concrete. This coating will avoid problems caused external influences such as friction, chemical spills, and reflect UV light. In addition it can also improve the appearance of concrete and make the surface easier to maintain. It also will protect your concrete from the danger of carbonation, corrosion and other chemical effects. If you want to replace this coating is also more easily stripped. It will not take your time and energy.

Using water based concrete coatings can also prevent your concrete from damage. This will make the concrete more durable. Cracked concrete will be easily infiltrated by damaging chemicals such as gas and liquid chemicals. Foreign particles can cause carbonation and corrosion. Small plants such as moss and fungus will be difficult to grow on the surface of the concrete lining.

Concrete coatings are used on almost every aspect of a home, starting from the floor, basement, roof and kitchen. These coatings in addition to functioning as protection also have a decorative function to enhance the appearance of your room. A concrete sealer is also needed in the kitchen of your home because in this place there are various chemicals that can damage your surface. Oils spills and other liquids are chemicals that can cause stains. By coating your concrete with water based coatings, the risk of damage is reduced. Your kitchen will appreciate it as suddenly it becomes easier to clean.

How to Pack and Protect an Ecommerce Shipment

There are many ongoing discussions with respect to the overall presentation and the marketing quotient of ecommerce shipments. But very few have been able to throw light on the finer nuances of packing and protecting an ecommerce shipment. After all, protection of the contents is the primary agenda of any packaging process. The beautification of the package is just an add-on component and not a primary requirement. While it does hold value in terms of marketing effectiveness and brand value creation, aesthetic appeal would not be much of a benefit if the content reaches the customer with damages.

What Should You Protect Against?

Completely eliminating damages is an impossible feat and if done, it would require excessive investments to be made to secure the content(s). The ecommerce shipper needs to arrive at an appropriate balance between the acceptable damages that may be incurred during the journey and the costs levied on additional packaging. However, this ratio depends on the companies and the products that are shipped. The ratio depends on the value of the product being shipped, the value of the repeat business of the ecommerce business and the feasibility of sending a replacement if excessive damage is incurred. Most of the times, excessive packaging may be justified if the content is of great value to the customer and needs to be delivered on time without any scope for error. But if you plan on wrapping a product such as a USB cable or a MIDI cable with multiple layers of packaging, then it is investment sent down the drain.

Apart from the actual contents of the package, due consideration should also be given to the nature of handling of the packages during transit. Exposure to rain, dirt, mild rough handling are common for such packages. Light ones will most probably get thrown around and almost all of them could fall down conveyors. So it is best to ensure that the package is able to withstand a 3 foot drop on to a concrete surface. In case the package is aligned for shipped outside the national borders, then it would be good to expect more than a few bumps on the package. On the basis of this understanding, it would be a good approach to secure the contents with appropriate packaging that is designed to enhance the protection value.

The Correct Way for Packing Fragile Contents

Before delving into the correct process for packing fragile products, it would be good to identify the reasons behind the damages incurred on such products. Subsequently, the relevant methods need to be identified with which the damages might be minimized. The two most important factors that are needed for an effective packaging design include damping and structural rigidity. Internal fixation of products is a mandatory requirement because the products may themselves collide and damage themselves, irrespective of the protective measures deployed on the external surface.

A good example of this is glass jars. While they may not require internal cushioning but for this arrangement to work, the internal structure should be rigid enough to keep the jars in place. If the placement is left loose, then the jars may collide with each other and break. This aspect should be checked thoroughly during packaging and if required, appropriate cushioning should be provide but only in needed. There is no point in adding to the packaging costs unless it is justified.

Selecting the Right Packaging Material for Shipment

The selection of the correct packaging materials is equally important as determining the structural specifications of the package. In order to determine the correct combination of materials, the following list may be used:

External Materials

o Jiffy Bag

o Poly Bag

o Single Wall Corrugated Box

o Double Wall Corrugated Box

o Book Wrap

o Card Envelope

Impact Resistant Materials

o Craft Paper / Brown Paper

o Bubble Wrap

o Corrugated Rolls

o Specialized Protective Materials

Cushioning / Void Filling Materials

o Air Cushions

o Craft Paper / Brown Paper

o Loose Fill

A Word of Advice

Packaging design is a crucial step in the shipment process where every aspect needs to be evaluated in detail. In case this cannot be done by the business, the using a packaging designer or packaging design consultant would be the most viable solution. After all, the need for maximizing cost value benefit holds utmost importance. Once you have the design, then sourcing the materials would be the only requirement as the assembly would depend on the type and quantity of the order placed. Additionally, you may also help in environmental safety by using materials that have been recycled and / or are biodegradable. These offer great cost benefits apart from ecological contribution.

Popular Home Improvements

Many home owners have been showing so much interest in improving their homes in the last few years. Most of them have already executed varying improvement projects for their homes and have been appreciating the results of this fruitful undertaking. Home improvement not only helps in raising the value of a home but also brings out a better and more attractive look for the home. This makes the owners feel more comfortable and confident with the place.

There are varying home improvement ideas that are available and ready for execution. The size and design of your house matters a lot and this can actually hinder you from applying some of the ideas. Within those varying ideas, there are a number of them that can be applied in most homes because of their usefulness and ease of design. They are the popular home improvements. The list below shows those improvements and can be used as a guide for choosing the best home improvements to go with.

1. Upgrading bathrooms and kitchens

With the increasing rise in technology, many bathroom and kitchen appliances are continuously being developed. Some of the appliances are oh so useful and economical. This makes them require a certain setup that cannot be accommodated by the old school room designs. This raises the need for a makeover on those places. New and highly attractive bathroom and kitchen designs that raise the value of a home are also coming up at a high rate, and this is making many home owners opt to go with those designs as they are truly elegant.

2. Using boilers

Boilers are highly valued assets that are continuously gaining fame and use because of the benefits they bring to home owners. Acquiring and installing them requires a good sum of money and this forces the value of a home to rise immediately after a boiler is installed. Apart from new installations, people are also replacing their old boilers with new ones that are more expensive and coming from reputable companies.

3. Double glazing

Many homeowners have been replacing their old windows with the double glazed ones due to a number of reasons. Double glazed windows are good at reducing noise and heat transfer. They are also important in improving home security as well as enhancing its value. This makes double glazing an important feature for homes and has thus been gaining a great acceptance and application by the people.

4. Home garden makeover

A home garden is an important part of the home’s face. Having a decent garden helps in creating a better image of the home and in turn raises its value. The home also becomes more attractive and this is something that every home owner wants. Being an easier and more economical way of improving the overall homestead, garden makeover is a very useful step and has thus been considered to be part of the popular home improvements that have been trending.

Conclusion

Home improvement is, in most cases, appearing to be an economical project that is better than launching new building projects from scratch. With a good budget, improving your home remains easy and timely enough. All the home improvements above are easy projects that can help in taking your home a level higher.